注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

小楼一夜听风雨

计算机知识、分子模拟、Linux学习,与您共分享!

 
 
 

日志

 
 

Discovery Studio 3.1 for Linux64在RHEL5.4下的安装  

2012-07-11 17:05:09|  分类: 分子模拟 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

一、配置IP地址和主机名
[phamlab@Server ~]# vi /etc/hosts; ##修改IP地址和主机名,主机名与msi.lic中保持一致
127.0.0.1  localhost.localdomain localhost
::1    localhost6.localdomain6 localhost6
192.168.1.XXX    Server Server

二、安装DS3.1
[phamlab@Server software]$ cd PP85_Linux64/
[phamlab@Server PP85_Linux64]$ ls
8_5_0_200      client_install.pdf  PP85_Readme.pdf  scirootinstall
admin_ref.pdf  Linux64             relnotes_85.pdf  sciseallow
AUTORUN.INF    msi.lic             relnotes_8.pdf   server_install.pdf
bin            packages            sciinstall
[phamlab@Server PP85_Linux64]$ ./sciinstall
Install the Pipeline Pilot Server on the following:
RHEL 5
SLES 11
Red Hat release 5 is supported.

Continue with the installation? (y or n)
>>>[y]

********************************************
*  Pipeline Pilot Server 8.5 Installation  *
********************************************
        1.  Install a new server
        2.  Reinstall an existing installation
        3.  Upgrade an existing installation
        4.  Install a new server to a new location and upgrade the database from existing installation
        5.  Add/Remove packages from an existing installation
Choose (1-5)>>>[1]

Enter the target directory for the server installation.
>>>/home/phamlab/Accelrys/PPS; ##该处最好指定Accelrys下级目录,否则将使PP等软件安装在Accelrys文件夹外。

Confirm path for the server installation:
/home/phamlab/Accelrys/PPS
Is this correct? (y or n)
>>>[y]

Enter the path to your license file.
>>>/home/phamlab/software/DSCollection_new.lic; ##该lic为安装模板许可,具体内容根据实际购买模板有所区别。注意:该lic并非最终软件许可(msi.lic)

            Package                    License         Status        Action
  1. Core                                Yes       Not Installed     Install   
  -. ADMET                                No       Not Installed     -         
  -. ADMET Data                           No       Not Installed     -         
  4. Admin Portal                        Yes       Not Installed     Install   
  -. Analytical Instrumentation           No       Not Installed     -         
  -. Biology Utilities                    No       Not Installed     -         
  7. Chemistry                           Yes       Not Installed     Install   
  8. Chemistry Advanced                  Yes       Not Installed     Install   
  -. Direct Chemistry Cartridge           No       Not Installed     -         
  -. Database Content                     No       Not Installed     -         
 11. Chemistry Data                      Yes       Not Installed     Install   
 12. Chemistry Molecular Toolkit         Yes       Not Installed     Install   
  -. ChemMining                           No       Not Installed     -         
  -. Client SOAP SDK                      No       Not Installed     -         
  -. Client SDK - .NET                    No       Not Installed     -         
  -. Client SDK - Java                    No       Not Installed     -         
  -. Client SDK - JavaScript              No       Not Installed     -         
 18. Core Utilities                      Yes       Not Installed     Install   
 19. Data Access                         Yes       Not Installed     Install   
  -. Decision Trees                       No       Not Installed     -         
 21. Platform Documentation              Yes       Not Installed     Install   
 22. Discovery Studio Client             Yes       Not Installed     Install   
 23. Discovery Studio Core               Yes       Not Installed     Install   
 24. Discovery Studio LicensePack        Yes       Not Installed     Install   
 25. Discovery Studio Pharmacophore      Yes       Not Installed     Install   
 26. Discovery Studio Protein Modeling   Yes       Not Installed     Install   
 27. Discovery Studio QM                 Yes       Not Installed     Install   
 28. Discovery Studio QSAR               Yes       Not Installed     Install   
 29. Discovery Studio SBD                Yes       Not Installed     Install   
 30. Discovery Studio Simulation         Yes       Not Installed     Install   
 31. Discovery Studio X-ray              Yes       Not Installed     Install   
  -. Gene Expression                      No       Not Installed     -         
  -. Gene Expression Data                 No       Not Installed     -         
 34. Generic                             Yes       Not Installed     Install   
  -. Imaging                              No       Not Installed     -         
  -. Imaging Advanced                     No       Not Installed     -         
  -. Imaging Advanced Data                No       Not Installed     -         
  -. Imaging Data                         No       Not Installed     -         
 39. Integration                         Yes       Not Installed     Install   
 40. Java Server                         Yes       Not Installed     None      
  -. List Management and Query Services   No       Not Installed     -         
  -. List Management and Query Services Application   No       Not Installed     -         
  -. Mass Spec Proteomics                 No       Not Installed     -         
  -. Mass Spec Proteomics Data            No       Not Installed     -         
  -. Materials Studio                     No       Not Installed     -         
  -. Data Modeling                        No       Not Installed     -         
  -. Advanced Data Modeling               No       Not Installed     -         
  -. Next Gen Sequencing                  No       Not Installed     -         
  -. Next Gen Sequencing Data             No       Not Installed     -         
  -. Plate Data Analytics                 No       Not Installed     -         
  -. Polymer Properties (Synthia)         No       Not Installed     -         
  -. Portlets                             No       Not Installed     -         
 53. Pipeline Pilot Client               Yes       Not Installed     Install   
  -. Reporting                            No       Not Installed     Embed     
  -. Reporting (Web Apps)                 No       Not Installed     Embed     
  -. RSS Integration                      No       Not Installed     -         
  -. R Statistics                         No       Not Installed     -         
  -. Sequence Analysis                    No       Not Installed     -         
  -. Sequence Analysis Data               No       Not Installed     -         
  -. SharePoint Bridge                    No       Not Installed     -         
  -. Text Analytics                       No       Not Installed     -         
  -. Web Application Framework            No       Not Installed     Embed     
  -. Web Port                             No       Not Installed     -         
 64. Web Services                        Yes       Not Installed     Install   

Required Space: 3.76 GB, Available Space: 646.75 GB
Choose a package number to toggle its action (1-64)>>>[y]

The server will use the following default ports:
HTTP: 9944
HTTPS: 9943
To accept these default ports, press Y.
To change these ports, press N.
Accept default ports? (y or n)
>>>[y]

The installer is checking the HTTP and HTTPS ports.
This may take a few minutes...
Ports 9944 and 9943 appear to be available.

The server requires the DISPLAY environment to be set to an appropriate X server.  For performance reasons, the X server should be local, and for headless startup, it should always be running.
By default, the server will startup Xvfb, an X windows virtual frame buffer, as display 9944 and use that as the DISPLAY environment.

The server requires a local directory for lock files (i.e., this directory should NOT be mounted via NFS).
NOTE: The default directory is /var/tmp. The lock file directory that is used requires read, write, and execute privileges for all users. Also note that for cluster configurations, this directory path must exist on each node's local hard drive.
If the default directory is acceptable, press ENTER.
To change to a different directory, enter its name.
Enter the lock file directory path.
>>>[/var/tmp] ;##此处指定安装过程中临时文件的存放位置,如需重装,则之前应该rm –rf *.*。

If this machine is the primary node in a cluster, select a cluster method:
         1. This node is not in a cluster
         2. Round Robin
         3. Job Leveling
Choose (1-3)>>>[1]

<中间过程略……>
Installation complete.
NOTE: To configure the server for local authentication, impersonation or to install a boot script, run the scirootinstall script as root:
/home/phamlab/Accelrys/PPS/install/scripts/scirootinstall

三、配置PP server和license server开机自启动,注册msi.lic

[phamlab@Server PP85_Linux64]$ cd /home/phamlab/Accelrys/PPS/install/scripts/
[phamlab@Server scripts]$ ls
scigridsetup  scirootinstall  sciseallow  scitegic.te  setpermissions.sh
[phamlab@Server scripts]$ ./scirootinstall

******************************************************
*    Pipeline Pilot Server Advanced Installation     *
******************************************************
This portion of the installation can only be run as root.
Exiting from the advanced installation.

[phamlab@Server scripts]$ su -
Password:
[root@Server ~]# cd /home/phamlab/Accelrys/PPS/install/scripts/
[root@Server scripts]# ls
scigridsetup  scirootinstall  sciseallow  scitegic.te  setpermissions.sh
[root@Server scripts]# ./scirootinstall

******************************************************
*    Pipeline Pilot Server Advanced Installation     *
******************************************************
Enter the directory of the SciTegic server installation.

>>>/home/phamlab/Accelrys/PPS/

The Apache web server should run under a non-root user account.
Enter the user account for running the Apache web server.
>>>phamlab
Confirm phamlab as the web server user? (y or n)
>>>[y]

User phamlab is a member of the following group(s):
>>>phamlab

Enter the user's group for running the Apache web server.
>>>phamlab
Confirm phamlab as the group for user phamlab? (y or n)
>>>[y]
Read token settings from /home/phamlab/Accelrys/PPS/install/tokens.config
Write token configuration file /home/phamlab/Accelrys/PPS/install/tokens.config
Changing file owners in /home/phamlab/Accelrys/PPS/ to phamlab.phamlab
Ignoring /home/phamlab/Accelrys/PPS//public/users ...

The installation of a boot script will allow the SciTegic server to launch automatically when the server machine starts up.
Press Y to install the boot script.
Press N to skip this step.
Install the boot script? (y or n)
>>>[y]
Copying /home/phamlab/Accelrys/PPS//linux_bin/ppilotd to /etc/init.d/ppilotd.9944 ... Done.
Configuring the autoload of the SciTegic
server daemon for runlevels 2 through 5 ... Done.
Setting permissions on /var/tmp/scitegic-mutexes-9944


Authentication is configured in the Admin Portal.
To enable Local authentication, a PAM configuration file must be installed (only once per system).

Press Y to allow Local authentication on this server.
Press N to skip this step.
Allow authentication on this server? (y or n)
>>>[y]
Configuring authentication...
Installing PAM configuration file (/etc/pam.d/scitegic)... Done.

Under impersonation, all jobs are run by
authenticated users. Impersonation is configured in the Admin Portal. But to enable this ability, authentication must be enabled and this script must set the correct permissions.

Press Y to allow impersonation on this server.
Press N to skip this step.
Allow impersonation on this server? (y or n)
>>>[y]

Configuring impersonation...
Setting directory permissions... Done
Advanced installation complete.  Please restart the server.

[phamlab@Server ~]$ cp /home/phamlab/software/msi.lic /home/phamlab/Accelrys/LicensePack/Licenses/
[root@Server scripts]# vi /etc/rc.local <配置lp_server开机自启动>

#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local

. /home/phamlab/Accelrys/LicensePack/etc/lp_profile
lp_server -s

Esc退出编辑, 按wq 保存并退出 vi

[phamlab@Server etc]$ cd /home/phamlab/Accelrys/LicensePack/etc
[phamlab@Server etc]$ ls
lp_archiver  lp_echovars     lp_lmenv       lp_profile
lp_config    lp_env_cleanup  lp_mpi_vars    lp_server_check
lp_cshrc     lp_ldenv        lp_plat_cshrc
[phamlab@Server etc]$ .  lp_profile
[phamlab@Server etc]$ lp_server –s ;##启动lp_server
Attempting to start the server...
Server has been started.

Run lp_set_env

    OR

csh: source /home/phamlab/Accelrys/LicensePack/etc/lp_cshrc
sh:  . /home/phamlab/Accelrys/LicensePack/etc/lp_profile

to refresh shell license administration environment setup.

[phamlab@Server etc]$ lp_server -x
Attempting to stop the server...
lmdown - Copyright (c) 1989-2006 Macrovision Europe Ltd. and/or Macrovision Corporation. All Rights Reserved.

   Port@Host            Vendors
1) 1715@Server          msi
    1 FLEXlm License Server shut down
Server has been stopped.

Run lp_set_env

    OR

csh: source /home/phamlab/Accelrys/LicensePack/etc/lp_cshrc
sh:  . /home/phamlab/Accelrys/LicensePack/etc/lp_profile

to refresh shell license administration environment setup.

四、升级DS3.1至DS3.1.1
[phamlab@Server etc]$ <打开另一个终端>
[phamlab@Server software]$ ./DS311Update.sh <升级DS3.1至DS3.1.1>
Welcome to the Discovery Studio 3.1.1 Update installer.
Enter the path of Discovery Studio 3.1 Client Installation: /home/phamlab/Accelrys/DiscoveryStudio31

Installing Patch...
Discovery Studio 3.1.1 successfully Installed.

  评论这张
 
阅读(2139)| 评论(1)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017